LED Bluetooth Galaxy Night Light Projector

Product Description:

Product material: ABS+PC

Rated power: 4.7W Rated voltage 5v1A

Executive standard: GB7000.204--2008GB7000.1--2015

Single product size: 165x101x88mm

Single product packaging size: 17x11x9.8cm

Single product and package gross weight: 300g/408g

Customs code: 109062403

Application name (English) SPACESHIP PROJECTION LAMP The built-in music of the projector lamp includes: white noise, insects and birds at night, flowing water, ocean

Precautions:

1. Please ensure that the product avoids contact with water and corrosive liquids;

2. If you need to clean the product, please make sure to disconnect the power supply;

3. Please use a charger that conforms to the CCC standard and outputs 5V 1A

4. Please use instructions: open the package, take out the product, connect the USB cable to use

1. Power on

Press the power button, the light is turned on, the color is blue, the two laser lights are turned on at the same time, and the green light is breathing mode (Note: from the darkest to the brightest, the time is 10s, and then from the brightest to the darkest, the time is also 10s ). The motor spins at low speed when turned on.

2. Rotate

When the motor is turned on, the motor is in the rotating state, press it once, the rotation is 2nd gear, press it again, the rotation is 3rd gear, and press it again, the rotation stops.

3. Music

Click the music button to turn on the built-in white noise, click again to switch the music, a total of three music, the last time to turn off the music, long press to adjust the volume When the Bluetooth connection is playing music, click the music button, the light will move with the music

4. LED lights

Click to switch the light color, a total of ten combinations. They are blue, red, green, white, red-blue, red-green, blue-green, red-green-blue, red-blue-white, color switching, last press to turn off the light, long press to adjust the brightness of the light.

5. Special effect lights

When the machine is turned on, the red light and the green light are on at the same time, and the green light is in a breathing state. Press it once to turn on only the red light, press it again, only turn on the green light, and press it again to turn off the light.

Bluetooth Instructions:

Bluetooth name: egogo-3

Bluetooth connection instructions:

Power on, the laser projector lamp works, Bluetooth is automatically turned on, look for the Bluetooth egogo-3 on the mobile phone, click on the egogo-3 to match, the host has a prompt tone, and the operation is completed. When disconnected, the host also has a disconnect prompt tone